FREE SVG! ✨ Layered Truck Patriotic Cricut Fourth of July Project
Celebrate the Fourth of July in style with this retro inspired layered truck SVG, complete with fireworks and American flag.
I see trucks in craft projects quite often and I love the retro feel to them. Over the past couple of years I’ve made quite a few different truck free cutting files for different occasions, so of course I had to make a 4th July version too!
This layered cutting file is perfect for celebrating Independence Day with its fun fireworks and waving American flag.
It’s a great project for using up some of your card scraps as it only needs small pieces of some of the colours.
See how to stick all the layers together (and the order they go in!) in this tutorial.
Video tutorial for 4th July truck SVG
Watch the video below to see how to make this craft project for birthdays. Keep scrolling for a written tutorial.
Layered patriotic truck shadow box materials
Here is a list of the materials that I used to make this project.
Please note that some of the links included in this article are affiliate links, which means that if you click through and make a purchase I may receive a commission (at no additional cost to you). You can read my full disclosure at the bottom of the page.
- Cricut Machine
- Light blue Cricut cutting mat
- Coloured Card (I used 160-240gsm weight of card)
- Collall All Purpose Glue
- Needle Tip Applicator Bottle
- 3D foam pads
Layered American truck SVG assembly instructions
Here’s how to make your very own USA truck using a Cricut machine!
Step 1) Download the free file & unzip the downloaded folder
Download the Free Cutting File
Please login to your account to download this file.
Don't have an account? Register for free
TERMS OF USE:
You may sell finished, handmade physical craft items that you have made using this product but must not sell or share the digital files. Read full terms of use
Before you upload the SVG to Design Space, you need to unzip the download folder that it comes in.
- How to unzip a folder on Windows computer
- How to unzip a folder on a Mac
- How to unzip a folder on an iPad/iPhone
- How to unzip a folder on an Android device
Step 2) Upload the SVG file into Design Space
Open up Cricut Design Space and upload the file called svg-4th-july-truck-craftwithsarah.svg
Make sure you upload the file which starts svg- in the filename!!
This is how it should look after you have uploaded the file:
After uploading, the truck design will show in your “Recently Uploaded Images”. Click on it and then press “Add to Canvas” to put it onto your Project.
Click the truck on your canvas and use the width/height boxes near the top of the screen to make it the size that you want to cut it.
I made mine 9.5 inches wide to fit inside a A4 photo frame. I definitely wouldn’t recommend going much smaller than about 6.5 inches in width as some of the pieces are quite little and delicate, so if you make the design much smaller it may be difficult to cut.
When you’re happy how the truck SVG is looking in Design Space, click “Make It” and follow the instructions on-screen to cut out all the layers.
Change the paper size with the dropdowns on the left of the screen. You need to change it for every colour.
You can drag-and-drop the pieces on the screen to move them about to take up less space on your cardstock.
Step 3) Stick the layered truck together
Use 3D foam pads and glue to stick the layers together.
Use this guide to see the order to stick the layers together in. A high quality printable version of this assembly guide is included in the folder when you download this SVG.
My favourite glue to use on papercraft projects is Collall All Purpose Glue.
It’s SO good because it doesn’t “warp” or bend the cardstock like some glues do. You can use as much of it as you want and the card stays perfect – and it dries perfectly clear too!
To make it even easier to apply glue to layered card projects, I highly recommend getting some of these needle tip applicator bottles to put the glue into.
The nozzles are REALLY tiny which makes them perfect for putting glue in the pieces of cardstock that make up this truck.
When adding the foam pads to the relevant layers, make sure you add some in the middle of the pieces of card so it give stability to the middles. If you don’t add any foam pads in the middles then it can “sag” under the weight of the other layers which doesn’t look as good.
Step 4) Frame your layered July 4th truck papercraft project
The final step is to frame your USA truck!
If you like this design, you may want to check out the matching truck designs for other seasons and Holidays:
- 4th July Truck
- Baby Truck
- Back to School Truck
- Birthday Truck
- Canada Day Truck
- Christmas Tree Truck
- Christmas Truck with Presents
- Easter Egg Truck
- Empty Retro Truck
- Fall / Autumn Truck with Pumpkins
- Farm Truck with Animals
- Flower Truck
- Graduation Truck
- Halloween Truck
- New Year's Eve Truck with Fireworks
- St Patrick's Day Truck
- Tropical Summer Truck
- Valentine's Day Truck with Hearts
- Wedding Truck
Love layered SVGs? Check out my other free layered SVG files
Happy crafting,
Sarah x