,

Easy DIY Halloween Countdown Cubes

Easy DIY Halloween Countdown Cubes

It’s October 1st, which means the countdown to Halloween has begun! Count down to the spookiest day of the year with these easy DIY countdown cubes.

I LOVE building excitement for the holidays, and Halloween is no exception! Build suspense as the days creep ever closer to Halloween with this fun countdown cube craft project.

All you need to do each day is turn the cubes around to show the new countdown date on the front.

Please note that some of the links included in this article are affiliate links, which means that if you click through and make a purchase I may receive a commission (at no additional cost to you). You can read my full disclosure at the bottom of the page.


About this project: Halloween countdown cubes

This is a fairly simple project to make as you only need basic crafting supplies: coloured card, double-sided tape and glue.

If you’re using 12×12 inch paper to cut the shapes from then you need one sheet each of three colours. If you’re using A4 (as I did), then you’ll need one sheet of orange, one sheet of black and two sheets on purple.

The free countdown cubes SVG is provided so that you can cut the design on your Cricut machine.

DIY Cricut Halloween countdown cubes to make

This project is part of 2020's Halloween Craft Countdown.

View all 31 craft projects!


Video tutorial

Watch this step-by-step video to see how to load the free SVG into Design Space and make the necessary steps to turn some of the cut lines into score lines before you click “Make It”.

Then, see how to stick all the cutouts together to form the finished countdown cubes!


Materials to make DIY Halloween Countdown Calendar


Get the free SVG

You can download the free SVG for these Halloween cubes by clicking the button below.

Get the free SVG

If you need help downloading files from my website, unzipping the downloaded folder and uploading SVG files to Cricut Design Space, watch this helpful training video that I recorded.

Part 1: Design Space tutorial

Below are step-by-step instructions on how to make these Halloween countdown cubes.

Step 1: Load the SVG into Design Space

The SVG design should load at the correct size in Design Space, but it’s a good idea to check – just in case!

Click on the design and make sure that the width is set to 10 inches. The height will be approximately 36.555 inches (this is because all the layers are “grouped” so it’s counting the entire height of all layers – don’t worry, it will cut on your usual 12×12 inch Cricut mats!)

Step 2: Set up the score lines

When you upload an SVG file into Design Space, it doesn’t know which lines you want to score instead of cut so you need to manually set that up.

The images below show the layers which you need to convert to score lines.

TIP: If you don’t have a scoring tool for your Cricut machine then do NOT convert these layers to score lines. Instead, right-click on each of the layers and delete them. You will need to manually score the lines once you have cut out the shapes.

To convert a cut line to a score line, left-click on the layer in the Layers panel (shown with the black arrows) and then look for the dropdown menu called “Linetype” near the top-left of your Design Space screen.

In the dropdown, change the line from “Cut” to “Score. You can tell that it’s worked because the lines will change to “dashed” rather than a solid line.

You need to repeat that step for ALL of the layers shown in the images below. There are four layers to convert in total.

First layer to change:

First layer to change to a score line

Second layer to change to “Score”:

Second  layer to change to a score line

Third layer to change to “Score”:

Third layer to change to a score line

Fourth layer to change to “Score”:

Fourth layer to change to a score line

Step 3: Attach the score lines to the shapes underneath

Now that we’ve converted our score lines, we need to use the “Attach” tool to attach the score lines to the coloured shapes underneath.

If you don’t do that then the score lines will be scored on a separate piece of card to the shapes, which isn’t what we want – we need to score the shapes that will be folded up into the cubes and stand for this project.

The first step towards achieving this is to “Ungroup” all of the layers. Left-click on the very top part in the layers panel which contains the filename of the SVG that you uploaded.

Ungroup the layers in Design Space

I grouped each “part” of the design separately, so we need to ungroup them too.

Let’s do the orange cube first. Click on the filename that contains the group of layers relating to the orange cube.

When you have selected the group, click the “Ungroup” icon above the layers panel.

Ungroup the orange cube layers

Next, click on your “Score” layer and then hold down CTRL on your keyboard and click the orange cube layer underneath. This will select BOTH layers together.

Click the “Attach” icon at the bottom of the layers panel to attach your score and cut layers together.

Attach score lines to cut lines in Design Space

Design Space will move the attached layers to the top of the layers panel. I like to drag-and-drop them back down underneath the black letters so that all the layers are showing in the correct order.

To keep your layers panel tidy, select the orange cube layers with the black number layers and “Group” them together.

You then need to repeat these steps for all of the Score lines to attach the “Score” line to the “Cut” shape underneath.

Once you’ve done that, you are ready to cut out the design!

TIP: If you change the paper size and it tries to make you use two sheets of card, you may be able to move the shapes from the second sheet onto the first one to avoid having to use two sheets of card. Watch the tutorial video above to find out how to do this, or check out this dedicated video on re-ordering Cricut mats.

Part 2: Countdown Cube Assembly

Once you’ve cut out the shapes, it’s time to get crafting!

Step 4: Assemble the orange cube

Turn the orange cube shape upside down and then fold all of the score lines INWARDS (towards you).

Be sure to fold all the lines along the tabs and the lines that appear between the different shapes on the card.

Fold the orange cube

Turn the shape the correct way up and open out the tabs. Add double-sided tape to all of the tabs.

Add double-sided tape to all of the tabs

Assemble the cube by folding it up and sticking the tabs to the corresponding edges.

TIP: Press down the flaps with your fingers on the inside of the cube to make sure it’s stuck really well!

How to fold a cube and stick together

Once the cube is stuck together, stick the black numbers on with glue. Add one number to each side of the cube.

TIP: Lay out the numbers on your table before sticking them on to make sure they are all the correct way around – particularly with the 5 and 2 which look quite similar when upside down!

Stick the black numbers to the orange box

Step 5: Assemble the black cube

Stick the black cube together in the same way as the orange one.

Attach the orange numbers to each side with glue.

Note: The same number doubles up as the 6 and the 9 – just turn it upside down to make the other number magically appear!

Assemble the black cube

Step 6: Make the purple step to hold the cubes

Use double-sided tape to stick the purple square WITH the score line to the side of the main purple cube shown in the photo below.

Make sure that the score line on the square is VERTICAL.

Stick these two purple pieces together

Turn the purple shape upside down and fold all the score lines inwards/towards you (just like you did for the orange/black cubes).

Add double-sided tape to all of the tabs.

Stick all of the sides together to make an oblong/rectangular box.

Make a box out of card

Choose one side of the purple box to the the back and add some double-sided tape. It doesn’t matter which side you choose.

Add double sided tape to the back of the purple box

Stick the remaining purple square to the back of your box to form the “back” of the cube holder.

Making the shelf for your countdown cubes

Step 7: Decorate the front

Add glue to the back of the “Happy Halloween” sentiment and stick it to orange shape that goes with it.

Glue the Happy Halloween sentiment to the orange shadow layer

Use glue or 3D foam pads to stick the orange shape to the front of the purple box.

Stick the sentiment on using foam pads

Sit back and enjoy your Halloween countdown cubes!

Woohoo – your countdown cubes are now complete!

Simply place the cubes on top and then turn them around each day to count down the days until Halloween.

Halloween countdown blocks made with Cricut and free SVG

I hope that you enjoy making this Cricut craft project, and that it helps you to get super excited for Halloween!

Happy crafting,
Sarah x

P.S – did you miss the link to the download? Get the free Halloween countdown SVG here.

This project is part of 2020's Halloween Craft Countdown.

View all 31 craft projects!

1 Comment

Leave a Reply

Your email address will not be published. Required fields are marked *