Free Hanukkah SVG šŸ•Ž 3D Menorah Craft Ideas for Hanukkah

Free Hanukkah SVG

Make a beautiful layered menorah for Hanukkah with this free SVG.

The details in the candelabrum are cut from two shades of gold cardstock for an extra bit of sparkle and shine.

Hanukkah menorah svg

Hanukkah papercraft materials

Here is a list of the materials that I used to make this project.

Please note that some of the links included in this article are affiliate links, which means that if you click through and make a purchase I may receive a commission (at no additional cost to you). You can read my full disclosure at the bottom of the page.

Menorah layered svg

Video tutorial for layered Hanukkah SVG

Watch the video below to see how to make this layered Hanukkah papercraft. Keep scrolling for a written tutorial.

Layered menorah craft assembly instructions

Here’s how to make your very own DIY paper menorah for Hanukkah using a Cricut machine.

Step 1) Download the free file & unzip the downloaded folder

Download the Free Cutting File

Reset password

Don't have an account? Register for free

You may sell finished, handmade physical craft items that you have made using this product but must not sell or share the digital files. Read full terms of use

Before you upload the SVG to Design Space, you need to unzip the download folder that it comes in.

Step 2) Upload the SVG file into Design Space

Open up Cricut Design Space and upload the file called SVG_Hanukkah_CraftWithSarah.svg

Make sure you upload the file which starts SVG_ in the filename!!

This is how it should look after you have uploaded the file:

After uploading, the design will show in your “Recently Uploaded Images”. Click on it and then press “Add to Canvas” to put it onto your Project.

Click the design on your canvas and use the width/height boxes near the top of the screen to make it the size that you want to cut it.

I made mine 7.75 inches tall (8.587 inches wide). I don’t recommend going smaller than about 5.5 inches in height as some of the details in the middles of the candle holders will get a bit too thin and hard to cut.

If you just want to cut the candelabrum without the background layers then look down the layers on the right-side of the screen and click the “eye” icon next to the bottom three layers to hide them.

Step 3) Cut the Hanukkah menorah SVG design

When you’re happy with how the design is looking in Design Space, click “Make It” and follow the instructions on-screen to cut out all the layers.

Use the dropdowns on the left of the page to change the paper size. You need to change it for every colour in the design.

Step 4) Stick the layered papercraft together

Use 3D foam pads and glue to stick the layers together.

Use this guide to see the order to stick the layers together in. A high quality printable version of this assembly guide is included in the folder when you download the cut file.

My favourite glue to use on papercraft projects is Collall All Purpose Glue.

It’s SO good because it doesn’t “warp” or bend the cardstock like some glues do. You can use as much of it as you want and the card stays perfect – and it dries perfectly clear too!

To make it even easier to apply glue to layered card projects, I highly recommend getting some of these needle tip applicator bottles to put the glue into.

The nozzles are REALLY tiny which makes them perfect for putting glue in the pieces of cardstock that make up this design.

The foam pads that I use are from “Dot & Dab”, but any foam squares will work. If yours are big then you may need to cut them smaller with scissors to fit inside the edges of the layers.

When adding the foam pads to the relevant layers, make sure you add some in the middle of the pieces of card so it give stability to the middles. If you don’t add any foam pads in the middles then it can “sag” under the weight of the other layers which doesn’t look as good.

Hanukkah layered SVG

After sticking all the pieces of card together, you’ll have a wonderful Hanukkah craft project all ready to be framed.

Free Hanukkah SVG for Cricut

You could also put it on a greetings card or even stick it straight to the wall with some blu-tack or command strips, or prop it up on a shelf.

The below video has some tips on how to frame your craft project, including my Number One hack for making sure that your design will fit perfectly every time without wasting any of your craft materials.

I hope that you enjoy this free layered Hanukkah SVG.

Love layered SVGs? Check out my other free layered SVG files

Happy crafting,
Sarah x